2600-8MHL-30 Optibelt Omega HL (High Load) Timing Belt
- 8MHL
- 325 teeth
- 2600mm pitch length
- 30mm wide
2600-8MHL-30 Optibelt Omega HL (High Load) Timing Belt is backordered and will ship as soon as it is back in stock.
Measuring Your Belt
Measuring Your Belt
Check the markings first. Most belts have their size printed on the back, for example A24, SPZ1000 or 8PK1200. Type that code into the search bar to find the exact match.
Markings worn off? Measure across the top of the belt for the width, and its depth. For the length, wrap a piece of string round the belt, mark where it meets, then lay the string flat and measure it.
Timing or ribbed belt? Count the teeth or ribs, and measure the gap between them.
Full step-by-step guide: How to measure your belt →
Still not sure? Call 020 8138 2848 and we’ll identify it for you.
Delivery and Shipping
Delivery and Shipping
We ship across the UK and worldwide. Choose an economical service if you can wait a few days, or express if the machine is stood still until the belt arrives. Delivery costs are worked out at checkout based on the weight of your order and where it's going. More Shipping Information
2600-8MHL-30 Optibelt Omega HL (High Load) Timing Belt
The Optibelt Omega HL (High Load) 2600-8MHL-30 is a 8M timing belt with a 8mm pitch, a 2600mm pitch length, 325 teeth and a width of 30mm. It’s made by Optibelt, our premier brand.
Optibelt Omega High Load, still widely known and marked as Omega HL, delivers up to 30% more performance than Omega High Power in Optibelt’s dynamic tests. Its reinforced fibreglass tension cord has a higher breaking strength and stands up to medium and heavy shock loads. The back is an aramid-reinforced polychloroprene compound and the teeth have a low-noise fabric facing. It runs at up to 98% efficiency from −30°C to +100°C, has limited oil resistance and is electrically conductive to ISO 9563. It is the choice for shock-loaded drives on textile machines, machine tools, compressors, printing, woodworking and paper machines.
It runs on standard HTD and RPP pulleys in the 8M profile, so no special pulleys are needed.
Specification
| Brand and range | Optibelt Omega HL (High Load) |
|---|---|
| Profile | 8MHL |
| Tooth pitch | 8mm |
| Pitch length | 2600mm |
| Number of teeth | 325 |
| Width | 30mm |
| Fits pulleys | HTD / RPP 8M |
Check it’s the right belt
- The old belt should be marked 2600 8MHL 30 on older belts, or 2600-8M-30 Omega High Load on newer ones. 2600 is the pitch length in mm, 8M the profile and 30 the width in mm.
- If the marking has worn off, count the teeth: this belt has 325. Multiply by 8mm to get the pitch length.
- Also available as Optibelt Omega in the same size.
- Also available as Optibelt Omega HP (High Power) in the same size.
Not quite the right size? The nearest sizes in this width are 2504-8MHL-30 and 2800-8MHL-30. Not sure? Call 020 8138 2848 and we’ll help you find the right belt.
-
Section
-
Range
-
Construction
-
Pitch / datum length (mm)
-
Pitch (mm)
-
Belt width (mm)
-
Teeth
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
