Help & advice Learn more
Bando RED-S II SC

Low-profile back-bend belts · C section width (22mm) · Built for agricultural drives

Bando RED-S II belts were developed specifically for agricultural machinery with reverse-bend drives. Their reduced thickness and optimised cord position let them bend round back-side idlers and small pulleys with far less stress, so they last many times longer than conventional V-belts on these drives. The SC is the C section width version, used on combines, balers, mowers, forage harvesters and other farm and grounds machinery. Search by the code on the old belt or your machine’s part number, and use the filters to narrow it down by length.

  • Built for back bendLow profile flexes round back-side idlers without cracking
  • Longer service lifeLasts far longer than conventional belts on reverse-bend drives
  • Agricultural dutyDesigned for the shock loads and dust of farm machinery
  • 22mm wideC section top width, in Bando’s low-profile construction

Choosing a RED-S II SC belt

Reading the codeThe code shows the RED-S II section (SC) followed by the length. Match both from your old belt, or search by your machine’s OE part number.

Replace like for likeRED-S II SC has the same top width as C section but a thinner, low-profile body. Swapping it for a standard C belt changes how it sits in the pulleys, so replace a RED-S II belt with a RED-S II belt.

Check the idlersReverse-bend drives are hard on belts. When you fit a new belt, check idler pulleys and bearings turn freely and pulley grooves aren’t worn.

Tip: Bando RED-S II belts are a popular upgrade where standard belts on agricultural machinery crack or fail early on back-side idlers.
View as

Compare /5