8/SPC5000 Optibelt KB Red Power 3 Kraftband V-Belt
- 8 bands
- 22mm wide
- 5000mm pitch length
- Red Power 3
8/SPC5000 Optibelt KB Red Power 3 Kraftband V-Belt is backordered and will ship as soon as it is back in stock.
Measuring Your Belt
Measuring Your Belt
Check the markings first. Most belts have their size printed on the back, for example A24, SPZ1000 or 8PK1200. Type that code into the search bar to find the exact match.
Markings worn off? Measure across the top of the belt for the width, and its depth. For the length, wrap a piece of string round the belt, mark where it meets, then lay the string flat and measure it.
Timing or ribbed belt? Count the teeth or ribs, and measure the gap between them.
Full step-by-step guide: How to measure your belt →
Still not sure? Call 020 8138 2848 and we’ll identify it for you.
Delivery and Shipping
Delivery and Shipping
We ship across the UK and worldwide. Choose an economical service if you can wait a few days, or express if the machine is stood still until the belt arrives. Delivery costs are worked out at checkout based on the weight of your order and where it's going. More Shipping Information
The Optibelt KB Red Power 3 8/SPC5000 is an 8-band SPC section high-performance banded V-belt with a 5000mm pitch length. It runs in 8 adjacent SPC pulley grooves and is made by Optibelt, our premier brand.
It combines Optibelt’s Red Power 3 high-performance wedge belts with a tough tie band across the top. The tie band stops individual belts turning over or jumping off the pulleys, so it’s the answer for heavily loaded drives with shock loads, long centre distances, vertical shafts or vibration.
Red Power 3 transmits up to 50% more power than conventional standard V-belts, at up to 97% efficiency. That often means fewer bands or smaller pulleys for the same job. It’s maintenance-free: once correctly tensioned it needs no re-tensioning for its whole life. It runs from −30°C to +100°C and is made to Optibelt’s S=C Plus tight length tolerances.
The bands have a rubber-coated fabric cover for wear resistance and flexibility, a particularly low-stretch polyester tension cord, and polychloroprene top and base layers with transverse fibres for rigidity and cord support. Typical uses include compressors, fans, pumps, mixers, presses and stone crushers.
Specification
| Brand and range | Optibelt KB Red Power 3 |
|---|---|
| Section | SPC |
| Number of bands | 8 |
| Top width (each band) | 22mm |
| Height (each band) | 18mm |
| Pitch length (Ld) | 5000mm |
| Power | Up to 50% more than standard V-belts |
| Efficiency | Up to 97% |
| Temperature range | −30°C to +100°C |
| Construction | Polychloroprene, low-stretch polyester cord, rubber-coated fabric cover, tie band |
Check it’s the right belt
- The old belt should be marked 8/SPC 5000 or 8-SPC5000, often with Red Power 3 or KB RP. The first number is how many bands. The letters are the section and the number is the pitch length in mm.
- Count the grooves on the pulley and check the pulley groove spacing suits a Kraftband. Kraftbands need pulleys with standard groove spacing.
- Each band is 22mm across the top. Measure one band, not the whole belt.
- Also available as the standard Optibelt Kraftband 8/SPC5000, or as single SPC5000 Red Power belts.
Need a different size? Red Power 3 Kraftbands are made in SPC from 2240mm to 10,000mm. Call 020 8138 2848 and we’ll help you find the right belt.
-
Section
-
Range
-
Construction
-
Top width (mm)
-
Height (mm)
-
Pitch / datum length (mm)
-
Bands
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
