Help & advice Learn more
Belt type DS8M double-sided Supertorque belts

8mm pitch · Supertorque teeth on both faces · Same pulleys as S8M

DS8M belts are S8M Supertorque timing belts with teeth on both faces, so one belt can drive pulleys on either side. They’re used on serpentine and reversing drives in packaging, printing and textile machinery where accuracy and quiet running matter. Search by the code on the old belt, such as DS8M-1200-30, and use the filters to narrow it down by length or width.

  • Pitch8mm, same as S8M
  • ToothSupertorque, both sides
  • ExampleDS8M-1200-30
  • PulleysS8M pulleys
  • UseSerpentine and reversing drives

Finding the right DS8M belt

Reading the codeDS8M-1200-30 is an S8M belt with a 1200mm pitch length and a 30mm width, toothed on both sides.

Single or double sided?If only one face of the belt drives anything, a standard S8M belt of the same size will do the job for less.

DS8M or D8M?D8M is the double-sided HTD version. The pitch is the same but the tooth shape isn’t, so match the belt to the pulleys on the drive.

Tip: Belts cut to width or length to order can’t be returned unless faulty, so check the pitch, length and width before ordering.
View as

Compare /5