Help & advice Learn more

Belt type PM ribbed belts

9.40mm rib pitch · Poly-V / multi-rib · Cut to the number of ribs you need

PM ribbed belts, also called poly-V or multi-rib belts, have ribs spaced 9.40mm apart. They combine the grip of a V-belt with the flexibility of a flat belt, so they run quietly round small pulleys at high speed. You’ll find PM belts on high-power industrial drives, crushers, mills, large compressors and big fan drives. Choose the number of ribs below, or search by the code on the old belt, such as 10PM2286.

  • Rib pitch9.40mm per rib
  • Example10PM2286 or 900M10
  • WidthRibs × 9.40mm
  • Ribs2 to 10 here, more on request
  • Made to orderCut to your rib count

Finding the right PM belt

Reading the code10PM2286 means 10 ribs, PM section, 2286mm effective length. Some belts use the older inch code 900M10: a 90.0″ length, M section, 10 ribs. Both describe the same belt.

MeasuringCount the ribs, and measure the width and divide by the rib count to confirm the pitch. For the length, measure round the back of the belt with a tape; that’s close to the effective length in the code.

PM or PL?PM ribs are 9.40mm apart, twice the PL pitch, so the ribs are noticeably bigger and deeper. Divide the width by the rib count to be sure.

Tip: Ribbed belts are cut to the number of ribs you need, and cut-to-order belts can’t be returned unless faulty, so check the section, rib count and length before ordering. Need more than 10 ribs? Call us and we’ll cut one to suit.

  • No code?Count the ribs and measure the width and length. Our how to measure guide shows you how.
  • Other sectionsTry PJ, PK or PL ribbed belts.
  • Still not sure?Call 020 8138 2848 with the code or measurements and we'll find the right belt.
  • Buying for a business?Open a trade account for trade pricing on maintenance stock and repeat orders.
View as

Compare /5

Loading...