Help & advice Learn more

Belt type PL ribbed belts

4.70mm rib pitch · Poly-V / multi-rib · Cut to the number of ribs you need

PL ribbed belts, also called poly-V or multi-rib belts, have ribs spaced 4.70mm apart. They combine the grip of a V-belt with the flexibility of a flat belt, so they run quietly round small pulleys at high speed. You’ll find PL belts on industrial drives, machine tools, pumps, fans, commercial laundry machines and agricultural machinery. Choose the number of ribs below, or search by the code on the old belt, such as 8PL1600.

  • Rib pitch4.70mm per rib
  • Example8PL1600 or 630L8
  • WidthRibs × 4.70mm
  • Ribs2 to 10 here, more on request
  • Made to orderCut to your rib count

Finding the right PL belt

Reading the code8PL1600 means 8 ribs, PL section, 1600mm effective length. Some belts use the older inch code 630L8: a 63.0″ length, L section, 8 ribs. Both describe the same belt.

MeasuringCount the ribs, and measure the width and divide by the rib count to confirm the pitch. For the length, measure round the back of the belt with a tape; that’s close to the effective length in the code.

PL or PK?PL ribs are 4.70mm apart, against 3.56mm for PK, so an 8PL is about 38mm wide where an 8PK is about 28mm. Divide the width by the rib count to be sure.

Tip: Ribbed belts are cut to the number of ribs you need, and cut-to-order belts can’t be returned unless faulty, so check the section, rib count and length before ordering. Need more than 10 ribs? Call us and we’ll cut one to suit.

  • No code?Count the ribs and measure the width and length. Our how to measure guide shows you how.
  • Other sectionsTry PJ, PK or PM ribbed belts.
  • Still not sure?Call 020 8138 2848 with the code or measurements and we'll find the right belt.
  • Buying for a business?Open a trade account for trade pricing on maintenance stock and repeat orders.
View as

Compare /5

Loading...