AT10-1600-55 Megadyne Megapower2 Polyurethane Timing Belt
- AT10
- 160 teeth
- 1600mm pitch length
- 55mm wide
AT10-1600-55 Megadyne Megapower2 Polyurethane Timing Belt is backordered and will ship as soon as it is back in stock.
Measuring Your Belt
Measuring Your Belt
Check the markings first. Most belts have their size printed on the back, for example A24, SPZ1000 or 8PK1200. Type that code into the search bar to find the exact match.
Markings worn off? Measure across the top of the belt for the width, and its depth. For the length, wrap a piece of string round the belt, mark where it meets, then lay the string flat and measure it.
Timing or ribbed belt? Count the teeth or ribs, and measure the gap between them.
Full step-by-step guide: How to measure your belt →
Still not sure? Call 020 8138 2848 and we’ll identify it for you.
Delivery and Shipping
Delivery and Shipping
We ship across the UK and worldwide. Choose an economical service if you can wait a few days, or express if the machine is stood still until the belt arrives. Delivery costs are worked out at checkout based on the weight of your order and where it's going. More Shipping Information
AT10-1600-55 Megadyne Megapower2 Polyurethane Timing Belt
The Megadyne Megapower2 AT10-1600-55 is an AT10 polyurethane timing belt with a 10mm pitch, a 1600mm pitch length, 160 teeth and a width of 55mm.
Megadyne Megapower2 is Megadyne’s endless polyurethane timing belt range for accurate synchronous drives. Polyurethane timing belts have a wear-resistant thermoplastic polyurethane body with steel tension cords, so they hold their length, keep exact timing with no slip, need no lubrication and resist oil, grease and abrasion.
Specification
| Brand and range | Megadyne Megapower2 |
|---|---|
| Profile | AT10 |
| Tooth pitch | 10mm |
| Pitch length | 1600mm |
| Number of teeth | 160 |
| Width | 55mm |
| Material | Polyurethane, steel tension cords |
Check it’s the right belt
- The old belt should be marked AT10-1600-55 (or AT10 1600 55). 1600 is the pitch length in mm and 55 the width in mm.
- If the marking has worn off, count the teeth: this belt has 160. Multiply by 10mm to get the pitch length.
- AT10 belts have a larger, stronger tooth than T10 and need AT10 pulleys; they won’t run on T10 pulleys.
Not quite the right size? Not sure? Call 020 8138 2848 and we’ll help you find the right belt.
-
Section
-
Range
-
Construction
-
Pitch / datum length (mm)
-
Pitch (mm)
-
Belt width (mm)
-
Teeth
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
