SPB6300 RP Optibelt Red Power High Performance V-Belt
- 16.3mm wide
- 13mm deep
- 6300mm pitch length
- High performance
SPB6300 RP Optibelt Red Power High Performance V-Belt is backordered and will ship as soon as it is back in stock.
Measuring Your Belt
Measuring Your Belt
Check the markings first. Most belts have their size printed on the back, for example A24, SPZ1000 or 8PK1200. Type that code into the search bar to find the exact match.
Markings worn off? Measure across the top of the belt for the width, and its depth. For the length, wrap a piece of string round the belt, mark where it meets, then lay the string flat and measure it.
Timing or ribbed belt? Count the teeth or ribs, and measure the gap between them.
Full step-by-step guide: How to measure your belt →
Still not sure? Call 020 8138 2848 and we’ll identify it for you.
Delivery and Shipping
Delivery and Shipping
We ship across the UK and worldwide. Choose an economical service if you can wait a few days, or express if the machine is stood still until the belt arrives. Delivery costs are worked out at checkout based on the weight of your order and where it's going. More Shipping Information
SPB6300 RP Optibelt Red Power High Performance V-Belt
The Optibelt Red Power SPB6300 RP is an SPB section high-performance wrapped wedge belt, 16.3mm wide with a 6300mm pitch length. It’s made by Optibelt, our premier brand, for larger fans, pumps, compressors and heavier industrial drives.
Red Power 3 is Optibelt’s high-performance, maintenance-free wrapped belt. It carries considerably more power than a standard wrapped belt of the same size, so drives can often run with fewer belts, and it’s made to Optibelt’s S=C PLUS standard, so belts of the same size can be used together as a set without measuring and matching.
Specification
| Brand and range | Optibelt Red Power 3 wrapped wedge belt (high performance) |
|---|---|
| Section | SPB |
| Top width | 16.3mm |
| Height | 13mm |
| Pitch length (Ld) | 6300mm |
| Construction | Wrapped, maintenance free, S=C PLUS |
Check it’s the right belt
- The old belt should be marked SPB6300. The letters are the section and the number is the pitch length in mm. Measure 16.3mm across the top and 13mm deep.
- Wedge belts are deeper than classical belts of a similar width, so check the depth as well as the width.
- If your belt isn’t 16.3mm wide, see our SPZ, SPA and SPC belts.
Not quite the right length? The nearest sizes are SPB6000 RP and SPB6700 RP, or see all SPB belts. For a standard-duty option, see the Optibelt SK SPB6300. On multi-belt drives, replace them all at once with belts of the same brand. Not sure? Call 020 8138 2848 and we’ll help you find the right belt.
-
Section
-
Range
-
Construction
-
Top width (mm)
-
Height (mm)
-
Pitch / datum length (mm)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
