DT10 Double-Sided PU Timing Belts | 10mm | TotallyBelts

Help & advice Learn more

Belt type DT10 double-sided PU belts

10mm pitch · T teeth on both faces · Steel-corded PU

DT10 belts are T10 polyurethane timing belts with teeth on both faces, so one belt can drive pulleys on either side. They’re used on serpentine and reversing drives in packaging, textile and conveying machinery. Search by the code on the old belt, such as DT10-1010-25, and use the filters to narrow it down by length or width.

Pitch10mm, same as T10
ToothT profile, both sides
ExampleDT10-1010-25
PulleysStandard T10 pulleys
UseSerpentine and reversing drives

Finding the right DT10 belt

Reading the codeDT10-1010-25 is a T10 belt with a 1010mm length and 25mm width, toothed on both sides.

Single or double sided?If only one face drives anything, a standard T10 belt of the same size will do the job for less.

PulleysThey run in standard T10 pulleys. Double-sided belts are thicker, so check clearance on the drive.

Tip: Belts cut to width or length to order can’t be returned unless faulty, so check the pitch, length and width before ordering.

No code?Measure the pitch, count the teeth and measure the width. Our how to measure guide shows you how.
Other sectionsTry DT5, T10 single-sided or AT10 belts.
Still not sure?Call 020 8138 2848 with the code or measurements and we'll find the right belt.
Buying for a business?Open a trade account for trade pricing on maintenance stock and repeat orders.