1400-RPP14 DD-85 Megadyne RPP Double-Sided Timing Belt
- RPP14 DD
- 100 teeth
- 1400mm pitch length
- 85mm wide
1400-RPP14 DD-85 Megadyne RPP Double-Sided Timing Belt is backordered and will ship as soon as it is back in stock.
Measuring Your Belt
Measuring Your Belt
Check the markings first. Most belts have their size printed on the back, for example A24, SPZ1000 or 8PK1200. Type that code into the search bar to find the exact match.
Markings worn off? Measure across the top of the belt for the width, and its depth. For the length, wrap a piece of string round the belt, mark where it meets, then lay the string flat and measure it.
Timing or ribbed belt? Count the teeth or ribs, and measure the gap between them.
Full step-by-step guide: How to measure your belt →
Still not sure? Call 020 8138 2848 and we’ll identify it for you.
Delivery and Shipping
Delivery and Shipping
We ship across the UK and worldwide. Choose an economical service if you can wait a few days, or express if the machine is stood still until the belt arrives. Delivery costs are worked out at checkout based on the weight of your order and where it's going. More Shipping Information
1400-RPP14 DD-85 Megadyne RPP Double-Sided Timing Belt
The Megadyne RPP 1400-RPP14 DD-85 is a double-sided 14mm-pitch RPP timing belt with a 1400mm pitch length, 100 teeth on each side and a width of 85mm. It runs on RPP and HTD 14M pulleys.
It has teeth on both sides, so it can drive pulleys from either face for serpentine and multi-shaft drives where shafts turn in opposite directions.
Megadyne Isoran RPP timing belts have a polychloroprene body, a fibreglass tension cord and nylon fabric on the teeth. The parabolic RPP tooth runs quietly and carries more load than a standard trapezoidal belt, and the belts are maintenance-free and need no lubrication.
Specification
| Brand and range | Megadyne RPP (Isoran) |
|---|---|
| Profile | RPP14 DD (D14M) |
| Tooth pitch | 14mm |
| Pitch length | 1400mm |
| Number of teeth | 100 each side |
| Width | 85mm |
| Fits pulleys | RPP / HTD 14M |
Check it’s the right belt
- The old belt should be marked 1400-RPP14 DD-85 (or 1400 RPP14 DD 85); other brands call this D14M. 1400 is the pitch length in mm and 85 the width in mm.
- If the marking has worn off, count the teeth on one side: this belt has 100. Multiply by 14mm to get the pitch length.
Not quite the right size? The nearest sizes in this width are 1344-RPP14 DD-85 and 1442-RPP14 DD-85. Not sure? Call 020 8138 2848 and we’ll help you find the right belt.
-
Section
-
Range
-
Construction
-
Pitch / datum length (mm)
-
Pitch (mm)
-
Belt width (mm)
-
Teeth
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
