1100 DH 30mm Megadyne Isoran Double-Sided Timing Belt
- DH double-sided
- 220 teeth
- 110″ pitch length
- 30mm wide
1100 DH 30mm Megadyne Isoran Double-Sided Timing Belt is backordered and will ship as soon as it is back in stock.
Measuring Your Belt
Measuring Your Belt
Check the markings first. Most belts have their size printed on the back, for example A24, SPZ1000 or 8PK1200. Type that code into the search bar to find the exact match.
Markings worn off? Measure across the top of the belt for the width, and its depth. For the length, wrap a piece of string round the belt, mark where it meets, then lay the string flat and measure it.
Timing or ribbed belt? Count the teeth or ribs, and measure the gap between them.
Full step-by-step guide: How to measure your belt →
Still not sure? Call 020 8138 2848 and we’ll identify it for you.
Delivery and Shipping
Delivery and Shipping
We ship across the UK and worldwide. Choose an economical service if you can wait a few days, or express if the machine is stood still until the belt arrives. Delivery costs are worked out at checkout based on the weight of your order and where it's going. More Shipping Information
1100 DH 30mm Megadyne Isoran Double-Sided Timing Belt
The Megadyne Isoran 1100 DH 30mm is a double-sided H-pitch imperial timing belt with a 12.7mm tooth pitch, a 110″ (2794mm) pitch length, 220 teeth on each side and a width of 30mm.
With teeth on both sides it can drive pulleys from either face, so one belt can turn shafts in opposite directions on serpentine and multi-shaft drives.
Megadyne Isoran imperial timing belts are made of polychloroprene rubber with a fibreglass tension cord and nylon fabric on the teeth. They’re maintenance-free, keep exact timing with no slip, and run from −25°C to 80°C.
Specification
| Brand and range | Megadyne Isoran |
|---|---|
| Profile | DH (double-sided H) |
| Tooth pitch | 12.7mm (0.5″) |
| Pitch length | 110″ (2794mm) |
| Number of teeth | 220 each side |
| Width | 30mm |
| Belt height | 5.9mm |
| Construction | Polychloroprene, fibreglass cord, nylon facing on both sides |
Check it’s the right belt
- The old belt should be marked 1100 DH 30mm. 1100 is the pitch length in tenths of an inch, DH is the profile, and the width is 30mm.
- If the marking has worn off, count the teeth on one side: this belt has 220.
- A double-sided belt has teeth on both faces. If yours is only toothed on one side, you need the single-sided H belt instead.
Not quite the right size? The nearest sizes in this width are 800 DH 30mm and 1250 DH 30mm. Not sure? Call 020 8138 2848 and we’ll help you find the right belt.
-
Section
-
Range
-
Construction
-
Height (mm)
-
Pitch / datum length (mm)
-
Pitch (mm)
-
Belt width (mm)
-
Teeth
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
