390 DXL 025 Optibelt ZR Double-Sided Timing Belt
- DXL double-sided
- 195 teeth
- 39″ pitch length
- 1/4″ wide
390 DXL 025 Optibelt ZR Double-Sided Timing Belt is backordered and will ship as soon as it is back in stock.
Measuring Your Belt
Measuring Your Belt
Check the markings first. Most belts have their size printed on the back, for example A24, SPZ1000 or 8PK1200. Type that code into the search bar to find the exact match.
Markings worn off? Measure across the top of the belt for the width, and its depth. For the length, wrap a piece of string round the belt, mark where it meets, then lay the string flat and measure it.
Timing or ribbed belt? Count the teeth or ribs, and measure the gap between them.
Full step-by-step guide: How to measure your belt →
Still not sure? Call 020 8138 2848 and we’ll identify it for you.
Delivery and Shipping
Delivery and Shipping
We ship across the UK and worldwide. Choose an economical service if you can wait a few days, or express if the machine is stood still until the belt arrives. Delivery costs are worked out at checkout based on the weight of your order and where it's going. More Shipping Information
390 DXL 025 Optibelt ZR Double-Sided Timing Belt
The Optibelt ZR 390 DXL 025 is a double-sided XL-pitch imperial timing belt with a 5.08mm tooth pitch, a 39″ (990.6mm) pitch length, 195 teeth on each side and a width of 1/4″ (6.3mm). It’s made by Optibelt, our premier brand.
With teeth on both sides it can drive pulleys from either face, so one belt can turn shafts in opposite directions on serpentine and multi-shaft drives.
Optibelt ZR timing belts are made of chloroprene rubber with a glass-fibre tension cord and a hard-wearing nylon fabric on the teeth. They’re maintenance-free, keep exact timing with no slip, and have a degree of oil, heat and cold resistance as standard.
Specification
| Brand and range | Optibelt ZR |
|---|---|
| Profile | DXL (double-sided XL) |
| Tooth pitch | 5.08mm (0.2″) |
| Pitch length | 39″ (990.6mm) |
| Number of teeth | 195 each side |
| Width | 1/4″ (6.3mm) |
| Belt height | 3.05mm |
| Construction | Chloroprene, glass-fibre cord, nylon facing on both sides |
Check it’s the right belt
- The old belt should be marked 390 DXL 025. 390 is the pitch length in tenths of an inch, DXL is the profile, and 025 is the width in hundredths of an inch.
- If the marking has worn off, count the teeth on one side: this belt has 195.
- A double-sided belt has teeth on both faces. If yours is only toothed on one side, you need the single-sided XL belt instead.
Not quite the right size? The nearest size in this width is 310 DXL 025. Not sure? Call 020 8138 2848 and we’ll help you find the right belt.
-
Section
-
Range
-
Construction
-
Height (mm)
-
Pitch / datum length (mm)
-
Pitch (mm)
-
Belt width (mm)
-
Teeth
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
