Timing belts Clamp plates
Linear drive clamps · Metric · Imperial
Timing belt clamp plates fix each end of an open length belt to a carriage, slide or door, so the belt can drive it in a straight line. The plate has teeth that mesh with the belt, so it grips without crushing the belt or letting it slip. Choose a plate that matches your belt’s profile and width.
Fitting tips
Match the profileThe plate’s teeth must match the belt profile exactly, such as T10, AT10 or 5M. A mismatched plate won’t hold.
Match the widthUse a plate at least as wide as the belt, so the full width is clamped.
Tension the beltFit both ends, then tension the belt evenly. Too loose and it can jump teeth; too tight and it wears the bearings.
- Open length · Rubber metricHTD, RPP and SLV profiles, 3M to 14M
- Open length · Rubber imperialMXL, XL, L and H profiles
- Open length · Polyurethane metricT, AT and HTD profiles, steel or aramid cord
- Open length · Polyurethane imperialMXL, XL, L, H and XH in polyurethane
- View all open lengthEvery open length belt in one place
- What we needThe profile, the belt width and the length you need. The profile and width are usually printed on the back of the belt.
- No markings?Measure the distance between teeth and the belt width. Our how to measure guide shows you how.
- Still not sure?Call 020 8138 2848 with the machine details or a photo of the belt and we’ll find the right one.
- Buying for a business?Open a trade account for trade pricing on maintenance stock and repeat orders.
- Most relevant
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
View as
