Help & advice Learn more

Belt type PK ribbed belts

3.56mm rib pitch · Poly-V / multi-rib · Cut to the number of ribs you need

PK ribbed belts, also called poly-V or multi-rib belts, have ribs spaced 3.56mm apart. They combine the grip of a V-belt with the flexibility of a flat belt, so they run quietly round small pulleys at high speed. You’ll find PK belts on vehicle engines (alternator, air con and power steering drives), compressors, garden machinery and general industrial drives. Choose the number of ribs below, or search by the code on the old belt, such as 6PK1200.

  • Rib pitch3.56mm per rib
  • Example6PK1200 or 472K6
  • WidthRibs × 3.56mm
  • Ribs2 to 10 here, more on request
  • Made to orderCut to your rib count

Finding the right PK belt

Reading the code6PK1200 means 6 ribs, PK section, 1200mm effective length. Some belts use the older inch code 472K6: a 47.2″ length, K section, 6 ribs. Both describe the same belt.

MeasuringCount the ribs, and measure the width and divide by the rib count to confirm the pitch. For the length, measure round the back of the belt with a tape; that’s close to the effective length in the code.

PK or PJ?PK ribs are 3.56mm apart, against 2.34mm for PJ. A 6PK belt is about 21mm wide; a 6PJ is about 14mm. Divide the width by the rib count to be sure.

Tip: Ribbed belts are cut to the number of ribs you need, and cut-to-order belts can’t be returned unless faulty, so check the section, rib count and length before ordering. Need more than 10 ribs? Call us and we’ll cut one to suit.

  • No code?Count the ribs and measure the width and length. Our how to measure guide shows you how.
  • Other sectionsTry PJ, PL or PM ribbed belts.
  • Still not sure?Call 020 8138 2848 with the code or measurements and we'll find the right belt.
  • Buying for a business?Open a trade account for trade pricing on maintenance stock and repeat orders.
View as

Compare /5

Loading...