XPA1932 Dunlop Cogged Wedge V-Belt
- 12.7mm wide
- 10mm deep
- 1932mm pitch length
XPA1932 Dunlop Cogged Wedge V-Belt is backordered and will ship as soon as it is back in stock.
Measuring Your Belt
Measuring Your Belt
Check the markings first. Most belts have their size printed on the back, for example A24, SPZ1000 or 8PK1200. Type that code into the search bar to find the exact match.
Markings worn off? Measure across the top of the belt for the width, and its depth. For the length, wrap a piece of string round the belt, mark where it meets, then lay the string flat and measure it.
Timing or ribbed belt? Count the teeth or ribs, and measure the gap between them.
Full step-by-step guide: How to measure your belt →
Still not sure? Call 020 8138 2848 and we’ll identify it for you.
Delivery and Shipping
Delivery and Shipping
We ship across the UK and worldwide. Choose an economical service if you can wait a few days, or express if the machine is stood still until the belt arrives. Delivery costs are worked out at checkout based on the weight of your order and where it's going. More Shipping Information
XPA1932 Dunlop Cogged Wedge V-Belt
The Dunlop XPA1932 is an XPA section cogged raw-edge wedge belt, 12.7mm wide with a 1932mm pitch length. It fits the same pulleys as an SPA wedge belt, and is a good-value replacement for industrial drives such as motors, pumps, fans and compressors.
Dunlop cogged belts have raw-edge sides and moulded cogs on the underside. The cogs make them more flexible than a wrapped belt, so they run on smaller pulleys and stay cooler, and the raw edges grip well even at lower tension, which saves energy. They resist heat and oil, and are antistatic to ISO 1813.
Specification
| Brand and range | Dunlop raw edge cogged |
|---|---|
| Section | XPA (fits SPA pulleys) |
| Top width | 12.7mm |
| Height | 10mm |
| Pitch length (Ld) | 1932mm |
| Construction | Raw edge, moulded cogs, antistatic (ISO 1813) |
Check it’s the right belt
- The old belt should be marked XPA1932. The letters are the section and the number is the pitch length in mm. Measure 12.7mm across the top and 10mm deep.
- A Dunlop XPA1932 can replace a wrapped SPA1932 belt, and usually runs cooler and lasts longer. On multi-belt drives, change the whole set.
- If your belt isn’t 12.7mm wide, see our XPZ and XPB belts.
Not quite the right length? The nearest sizes are XPA1900 and XPA1950, or see all XPA belts. Not sure? Call 020 8138 2848 and we’ll help you find the right belt.
-
Section
-
Range
-
Construction
-
Top width (mm)
-
Height (mm)
-
Pitch / datum length (mm)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
