Help & advice Learn more
Belt type S14M Supertorque timing belts

14mm pitch · Supertorque (STD) teeth · Metric sizes

S14M belts use the Supertorque (STD) tooth, a modified round tooth that carries more torque, runs more quietly and positions more accurately than a standard HTD belt of the same pitch. You’ll find them on heavy industrial and high-torque drives. Search by the code on the old belt, such as S14M-1400-55, and use the filters to narrow it down by length or width.

  • Pitch14mm
  • ToothSupertorque (STD)
  • ExampleS14M-1400-55
  • Teeth100 on a 1400mm belt
  • PulleysS-profile pulleys

Finding the right S14M belt

Reading the codeS14M-1400-55 is a S14M belt with a 1400mm pitch length and a 55mm width. The S at the front tells you it’s the Supertorque profile.

Counting teethPitch length divided by 14mm gives the tooth count, so a 1400mm S14M belt has 100 teeth.

Supertorque or HTD?An S14M belt has the same 14mm pitch as an 14M HTD belt, but the teeth are shaped differently and need S-profile pulleys. Replace like for like; if the old belt has no S in the code, it’s probably HTD.

Tip: Belts cut to width or length to order can’t be returned unless faulty, so check the pitch, length and width before ordering.

  • No code?Measure the pitch, count the teeth and measure the width. Our how to measure guide shows you how.
  • Other sectionsTry S2M, S3M, S5M or S8M Supertorque, or 14M HTD belts.
  • Still not sure?Call 020 8138 2848 with the code or measurements and we'll find the right belt.
  • Buying for a business?Open a trade account for trade pricing on maintenance stock and repeat orders.
View as

Compare /5